1. Choose the Right Position and Direction

The flowmeter’s position affects accuracy. Follow these tips:

• First, decide if it should be vertical or horizontal. This depends on the fluid and use case.
• For example, in horizontal pipes, solids might settle at the bottom. Install vertically to avoid this.

2. Follow the Flow Direction

Always face the flowmeter the same way as the fluid. Check the arrows on the device.

• Second, add a check valve for gas systems. This stops reverse flow when the system is off.

3. Keep Pipes Straight Around the Flowmeter

Uneven flow at the pipe entrance can cause errors. Here’s how to fix it:

• Third, use a flow conditioner to smooth the flow before it reaches the flowmeter.
• Finally, leave enough straight pipe on both sides of the flowmeter. This reduces disturbances.

4. Match the Pipe Size and Avoid Vibration

The flowmeter must fit the pipe size. Otherwise, readings may be wrong.

• Additionally, use a reducer pipe for very slow or fast flows. This keeps the device working well.
• Moreover, avoid shaking. Install the flowmeter on stable pipes to reduce vibration.

Conclusion

Correct installation of a flowmeter ensures accurate data and saves costs. By following these steps:

In summary, choose the right position, direction, pipe length, and avoid vibration. This keeps your equipment working longer.